Electrochemical Drilling Produces Absolutely No Burr Or Drilling Caps
HIGHLIGHTS
- Drilling produces no burr or drilling caps. This means no deburring – a crucial advantage for machining components which are difficult to access.
- The material is not heated by the ECM process which means no negative effects on its microstructure and no micro-cracks.
- A lot of ECM boreholes (20 or more) can be drilled at the same time; short cycle times and lean processes are a matter of fact. The feed rate can be up to 5 mm/min.
- The process is suitable for hard and soft machining. The material hardness does not affect the feed rate.
- The service life of the drilling cathodes is very long, even for hard materials. The tools suffer almost no wear.
EMAG India Pvt Ltd
